Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rear Wiper Blade on a Citroen C3

Model: Citroen C3 FC, FN - Years 2002-2009
Part: Windshield wipers

This guide shows you how to remove and replace the rear wiper blade on a Citroen C3. Grasp the rear wiper blade with your hands, gently pull the rubber from the moving blade (without breaking it), and slide it off the arm on the left. Fit the new wiper rubber onto the arm (if the rubber is original, you may need to adjust the length by cutting it as shown). Finally, lower the wiper arm onto the rear window and test the new blade by activating the rear wiper. It is always preferable to use original parts for better durability and quality.

Updated on 2 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Rear Wiper Blade on a Citroen C3
How to Replace the Rear Wiper Blade on a Citroen C3
Citroen C3 (2016-2023 / SY, SX) In this brief guide, we will see the instructions that will allow us to remove and replace the rear wiper blade of the Citroen C3 in simple steps. Fi…
How to Replace the Front Wiper Blade of the Citroen C3
How to Replace the Front Wiper Blade of the Citroen C3
Citroen C3 (2002-2009 / FC, FN) Below are the instructions for removing and replacing the front wiper blades of the Citroen C3. First, move to the front of the vehicle and begin lif…
How to Replace the Wiper Blade on a Citroen C3
How to Replace the Wiper Blade on a Citroen C3
Citroen C3 (2009-2016 / SC) In this tutorial, see how to replace the wiper blade on a Citroen C3 by following these simple steps: first, purchase a new wiper blade from an autho…

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos