Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions

Lincoln Mks - Key

Lincoln Mks (2009-2016 / MK 1)
How to replace the battery of the Lincoln MKS remote control?
Replacing the remote control battery of the Lincoln MKS, as we can see in this tutorial, is a very simple and fast operation. To do this, we will need a small …read all…
Posted on 22 April 2023 by ScegliAuto
Lincoln Mks (2009-2016 / MK 1)
Changing the battery in the Lincoln Mks remote control
To change the remote control battery in your Lincoln Mks you will need a CR2032 coin cell battery. We will open the remote control from the rear button of the …read all…
Posted on 11 May 2023 by ScegliAuto
Lincoln Mks (2009-2016 / MK 1)
How to replace the Lincoln MKS remote control battery?
As we can see in this tutorial, changing the remote control battery of your Lincoln MKS is a very simple and fast operation. To do this, we will need a spare …read all…
Posted on 29 November 2022 by ScegliAuto
Lincoln Mks (2009-2016 / MK 1)
How to use the Keyless Entry Pad on the Lincoln MKS
How to use the Lincoln MKS Keyless Entry Pad. The use is really simple, because it is a question of using the coding system which is loaded on the front pillar …read all…
Posted on 8 September 2022 by ScegliAuto
Key (4) -board computer (2) Headlight (1) Air filter (1) Cabin air filter (3) Headlight bulb (1) Door panel (1) Brake pads (1) Instrument cluster (2) Fuse box (1) Outside rearview mirror (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos