Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
To replace the brake pump hose, remove all the fairings located in the front inner part of the motorcycle and those in the footwell. Once these panels are removed, locate the hose that runs from the lever on the right side of the handlebars and extends to both the front and rear wheels. This hose must be released from the lever by loosening the appropriate bolt, and you can then proceed to loosen the other bolts securing it to the pump itself. At this point, you can pull it out of its housing and replace it with a new one.

Updated on 24 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Clutch Release Bearing on the LML Star?
How to Replace the Clutch Release Bearing on the LML Star?
Star To replace the clutch release bearing on the LML Star, first loosen the screws securing the left side cover of the motorcycle near the rear wheel: by…
Front Brake Pad Replacement on LML Star, Vespa PX
Front Brake Pad Replacement on LML Star, Vespa PX
Star In this tutorial video, we will see how to remove and replace the front brake pads of an LML Star and a Vespa PX. To remove the pads, first take off …
How to Replace the Starter Motor on an LML Star?
How to Replace the Starter Motor on an LML Star?
Star To replace the starter motor on an LML Star, remove the right side panel of the bike, located near the seat. Under this panel, you will find the star…

How to Dismantle the TM Racing KZ10C Engine?

To dismantle the TM Racing KZ10C engine, first remove it from its housing by unscrewing the screws that secure it to the respective supports and disconnecting all cables. Once the block is freed, loosen the screws that secure the cylinder so it can be removed from the top; after removal, unscrew the screws that secure the two side casings, removing these as well to access the additional components inside the engine. After replacing the affected parts, close the engine by securing the casings again.

Watch the video!


by ScegliAuto

More videos