Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mahindra
    3. :
  3. Reva
    4. : Wheel

Mahindra Reva - Wheel

Mahindra Reva (2001-2012 / MK 1)
Where is the Mahindra Reva spare wheel located?
The spare wheel of the Mahindra Reva is located inside the engine compartment: in order to reach it, it will therefore be necessary to open the bonnet, …read all…
Posted on 4 April 2023 by ScegliAuto
Battery (1) Checks and maintenance (4) Side turn signal light bulb (1) Headlight bulb (1) Rear light bulb (1) Wheel (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos