Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mahindra
    3. :
  3. Reva
    4. : Where is the Mahindra Reva spare wheel located?

Mahindra Reva - Video tutorial

Model: Mahindra Reva MK 1 - Years 2001-2012
Part: Wheel
Operation: Where is the Mahindra Reva spare wheel located?

The spare wheel of the Mahindra Reva is located inside the engine compartment: in order to reach it, it will therefore be necessary to open the bonnet, identifying the piece that will be found in the area immediately in front of the engine block. In order to remove the wheel from its housing it will be necessary to unscrew all the bolts that fix it to its seat in the central part. Once the bolts have been loosened, the wheel can be removed and used to replace one of the car's wheels by jacking it up and removing the old wheel from the hub.


Posted on 4 April 2023 by ScegliAuto

Other guides that may interest you

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos