Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Guide to Replacing a Battery in the Mahindra Reva - G Wiz

Model: Mahindra Reva MK 1 - Years 2001-2012
Part: Battery

Follow this guide and the steps to remove and replace the battery in the Mahindra Reva and G Wiz. First, open the hood and remove the driver's seat and the rear bench seat to access the battery pack located underneath. Next, disconnect the wiring from the battery to be replaced, as shown in the video. At this point, lift the battery and install the new one of the correct type and with the same amperage. Connect the battery in series and reassemble everything!

Updated on 5 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Charge the Mahindra Reva Battery
How to Charge the Mahindra Reva Battery
Mahindra Reva (2001-2012 / MK 1) In this guide, follow the procedure to charge the Mahindra Reva battery. First, get your battery charging cable; then move to the left side and open …
How to Recharge the Batteries of the Mahindra Reva
How to Recharge the Batteries of the Mahindra Reva
Mahindra Reva (2001-2012 / MK 1) This guide provides instructions on how to recharge the battery with electrolyte or distilled water for the Mahindra Reva batteries. First, open the …
How to Replace the Front Turn Signal Bulbs on the Mahindra Reva
How to Replace the Front Turn Signal Bulbs on the Mahindra Reva
Mahindra Reva (2001-2012 / MK 1) In this guide, learn how to remove and replace the front turn signal bulbs on the Mahindra Reva in simple and quick steps. First, move to the front o…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos