Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mahindra
    3. :
  3. Reva
    4. : Mahindra Reva headlight bulb replacement

Mahindra Reva - Video tutorial

Model: Mahindra Reva MK 1 - Years 2001-2012
Part: Headlight bulb
Operation: Mahindra Reva headlight bulb replacement

In this video tutorial we will see how to disassemble and replace the Mahindra Reva headlight bulb, following the instructions below. First of all, we open the front hood of our car and begin to disconnect the electrical connector of our light bulb, turning the support fixed on the ceiling light of the optical group; we then remove the light from the lamp holder, as shown in the video. At this point we are going to install the new headlight bulb, of the right type (in this case with H4 connection); we install the new lamp and reassemble everything!


Posted on 8 May 2024 by ScegliAuto

Other guides that may interest you

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos