Do it yourself
Frequently asked questions about cars and motorcycles

Guide to Removing the Rear Seat on an Alfa Romeo 159

Model: Alfa Romeo 159 MK 1 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011
Part: Rear bench seat

Video tutorial

Here are the instructions to help you disassemble and remove the rear seat of the Alfa Romeo 159. First, open the rear doors of the vehicle and begin to push the rear seat forward, then pull it upwards to detach it from the cabin; clean or replace it as shown in the video.

By unscrewing the screws located at the bottom, you can also remove the backrests if necessary; then reassemble the seats and the rear seat, securing it properly by applying the reverse procedure!


Posted on 20 September 2026 by ScegliAuto


Related tutorials

…
Alfa Romeo 159 (2005-2011 / MK 1) In this video tutorial, you will learn how to remove the rear seats of an Alfa Romeo 159, following the instructions below. First, open the rear door…
Alfa Romeo 159 (2005-2011 / MK 1) Before you can start, open the tailgate of the boot on your Alfa Romeo 159. Begin by moving the carpet that covers the fixing nuts of the rear light.…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos