Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mahindra
    3. :
  3. Reva
    4. : Checks and maintenance

Mahindra Reva - Checks and maintenance

Checks And Maintenance Mahindra Reva (2001-2012 / mk 1)

Mahindra Reva (2001-2012 / MK 1)
How to Recharge the Batteries of the Mahindra Reva
This guide provides instructions on how to recharge the battery with electrolyte or distilled water for the Mahindra Reva batteries. First, open the distilled …Read all…
Posted on 5 August 2026 by ScegliAuto
Mahindra Reva (2001-2012 / MK 1)
How to Replace the Basic Controller on the Mahindra Reva Electric
The Mahindra Reva is the first fully electric car from India. This guide shows how to replace the DC controller of the car. This component supplies power to …Read all…
Posted on 22 August 2026 by ScegliAuto
Mahindra Reva (2001-2012 / MK 1)
How to Charge the Mahindra Reva Battery
In this guide, follow the procedure to charge the Mahindra Reva battery. First, get your battery charging cable; then move to the left side and open the cover …Read all…
Posted on 16 August 2026 by ScegliAuto
Mahindra Reva (2001-2012 / MK 1)
How to Replace the Gas Springs on the Rear Window of a Mahindra Reva?
To replace the gas springs on the rear window of a Mahindra Reva, open the window to access its interior where the gas springs are located. These can be …Read all…
Posted on 18 July 2026 by ScegliAuto
Battery (1) Checks and maintenance (4) Side marker bulb (1) Headlight bulb (1) Tail light bulb (1) Wheel (1)

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos