Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mahindra
    3. :
  3. Reva
    4. : How to replace Basic controller on Mahindra Reva Electric

Mahindra Reva - Video tutorial

Model: Mahindra Reva MK 1 - Years 2001-2012
Part: Checks and maintenance
Operation: How to replace Basic controller on Mahindra Reva Electric

The Mahindra Reva is India's first all-electric car. In this video we show how to replace the car DC controller. This element supplies the current in order to have the power necessary to operate the multiple electrical elements of the vehicle. Before replacing it you will have to get a new or working one and to find out if it is right for you, look carefully at the labels on one side which give the technical specifications of the controller itself. If this is the first time you have repaired an electric car, we advise you to take a picture of how the cables are positioned so as not to compromise the functioning of the vehicle itself. You will have to disassemble the seats. Disconnect all wires and cables connected to it, replace it with the new one and reconnect the cables.


Posted on 11 December 2022 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos