Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Mahindra
  4. :
  5. Reva
  6. : How do you replace the gas springs in the rear window of the Mahindra Reva?

Mahindra Reva - Video tutorial

Model: Mahindra Reva MK 1 - Years 2001-2012
Part: Checks and maintenance
Operation: How do you replace the gas springs in the rear window of the Mahindra Reva?

To be able to replace the gas springs of the rear window of the Mahindra Reva you have to go and open this rear window, so that you can have access to its internal part where the gas springs are located. The latter can be removed by unscrewing the screws that secure them in the upper part connected to the rear window and in the lower part connected to the uprights. Once the screws have been loosened, the old springs can be completely removed so that the new ones can be inserted. After they have been fixed it will be necessary to verify that everything is working correctly.


Posted on 15 May 2024 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos