Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Mahindra
  4. :
  5. Scorpio Goa Getaway
  6. : How to reset the Mahindra Scorpio service light

Mahindra Scorpio Goa Getaway - Video tutorial

Model: Mahindra Scorpio Goa Getaway MK 3 - Years 2014-2023
Part: -board computer
Operation: How to reset the Mahindra Scorpio service light

In this new mini guide on the Mahindra Discoverrio we will find out how to properly reset the service light. Thanks to the following indications you will be able to carry out the entire procedure in a few seconds and without any difficulty. First, make sure the car is completely off and the doors are closed properly. Immediately afterwards, hold down the button located just below the rev counter and at the same time turn on the car ignition. Once this is done, release the button you used previously and the reset procedure is complete.


Posted on 9 May 2024 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos