Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mahindra
    3. :
  3. Scorpio Goa Getaway
    4. : How to disassemble the door panel in Mahindra Scorpio?

Mahindra Scorpio Goa Getaway - Video tutorial

Model: Mahindra Scorpio Goa Getaway MK 2 - Years 2009-2014
Part: Door panel
Operation: How to disassemble the door panel in Mahindra Scorpio?

As we can see in this tutorial, removing the inner door panel, in the Mahindra Scorpio, is an extremely simple operation. To do this, we will need a cross-tip screwdriver and, if necessary, a plastic spatula. First of all, unscrew the screw located inside the opening handle, then remove the front part of the support handle and unscrew the two screws inside. Subsequently, we disengage the panel from the door by pulling it towards us and levering along the entire perimeter, helping us with the spatula if necessary.


Posted on 2 May 2023 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos