Do it yourself
Frequently asked questions about cars and motorcycles

How to Change the Key Battery in a Mahindra Thar

Model: Mahindra Thar MK 1 - Years 2010-2020
Part: Key

If you notice difficulty opening the doors with the remote key and have to get very close to the vehicle, it’s probably time to change the key battery. To do this, follow the simple instructions below. Take the key and, using your fingers, pry open the cover located on the back of the remote to remove it. Underneath, you will find the battery compartment for a CR 2032 battery, and you can use a sharp object to extract it. Then, take the new battery and place it in the compartment, making sure to position the positive side facing up. Finally, replace the cover and close it, and the job is complete.

Updated on 4 July 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

Mahindra Thar (2020-2026 / MK 2) In this guide dedicated to the Mahindra Thar BS6, you will discover where the fuse box is located. Remember that any maintenance or replacement of th…
Mahindra Thar (2020-2026 / MK 2) To reset the trip odometer (Trip A) on your Mahindra Thar Mk2, follow this manual reset procedure. First, insert the key, turn it to the first positi…
Mahindra Thar (2020-2026 / MK 2) In this tutorial, you will see how to reset the service light on the Mahindra Thar, a very simple operation. Before proceeding, make sure you have co…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos