Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mahindra
    3. :
  3. Thar
    4. : How to replace your Mahindra Thar key

Mahindra Thar - Video tutorial

Model: Mahindra Thar MK 1 - Years 2010-2020
Part: Key
Operation: How to replace your Mahindra Thar key

If we need to replace the remote control key battery on this car model, we will find useful information on how to move and behave in the description below and in the video tutorial. First you need to open the flip key and release the rear cover of the remote control using your fingers to make it slide. Under the cover we will find the compartment that contains the battery that we are going to remove and replace with the new CR 2032 model, being careful to position the positive pole facing upwards. Then proceed to reattach the rear cover of the key and the job is completed.


Posted on 4 June 2023 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos