Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Mahindra
  4. :
  5. Xuv300
  6. : How to replace battery on Mahindra Xuv300

Mahindra Xuv300 - Video tutorial

Model: Mahindra Xuv300 MK 1 - Years 2019-2024
Part: Key
Operation: How to replace battery on Mahindra Xuv300

If we have realized that, when we go to open the doors with our remote control key, we have to get very close to the car for the central locking to unlock, it is probably necessary to replace the key battery because it is almost flat. To do this we can follow the instructions below. On the back of the key there is a flap that can be opened by sliding it to one side. Under it we will find the battery housing which can be removed with a pointed object and replace it with the new one, always paying attention to position the positive pole facing upwards. Finally re-attach the lid by sliding it again and you're done.


Posted on 19 April 2023 by ScegliAuto

Other guides that may interest you

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos