Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Mahindra
  4. :
  5. Xuv300
  6. : How to replace Mahindra XUV key controls

Mahindra Xuv300 - Video tutorial

Model: Mahindra Xuv300 MK 1 - Years 2019-2024
Part: Key
Operation: How to replace Mahindra XUV key controls

If we want to proceed with repairing the remote control key of our car in the event that the closing and opening controls are damaged, we will find the information and methods to follow in the description below and we can also refer to the video. First, use a pointed object to pry and remove the rear cover where the battery is located and then gently remove the printed circuit board from the transponder. Once the cover and the transponder have been removed, we need to remove the key fixing pin and in doing so we will have completely disassembled the panel with the keys. Then proceed backwards to reassemble all the components on the new panel.


Posted on 11 June 2023 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos