Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Mahindra
  4. :
  5. Xuv300
  6. : How to reset the Mahindra Xuv 300 service light

Mahindra Xuv300 - Video tutorial

Model: Mahindra Xuv300 MK 1 - Years 2019-2024
Part: -board computer
Operation: How to reset the Mahindra Xuv 300 service light

If you want to postpone the service of your Mahindra Xuv 300 or if you have just done it and you want to get rid of the warning light then all you have to do is put the following indications into practice. First make sure you start the reset procedure with the car completely off. Then press the "Engine Start/Stop" button and start the car ignition. Turn it off immediately afterwards and turn it on again by holding down the first button immediately to the right of the red triangle at the same time. Wait a few seconds and the procedure is completed successfully. In case of errors you can safely turn off the ignition and repeat the procedure.


Posted on 4 April 2023 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos