Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mahindra
    3. :
  3. Xuv300
    4. : How to perform a service reset on Mahindra XUV 300

Mahindra Xuv300 - Video tutorial

Model: Mahindra Xuv300 MK 1 - Years 2019-2024
Part: -board computer
Operation: How to perform a service reset on Mahindra XUV 300

In this video tutorial we can see how to reset the service warning light on Mahindra XUV 300. The first thing to do will be to perform vehicle maintenance, such as changing the engine oil and filters; after performing the do-it-yourself service, get in the car, close all the doors, insert the key and switch on the ignition only, now you have to use the touch screen display of the car radio and look for the SERVICE INFO (Service Due) item; now press the START button once, the display will be off; now you have to hold down the SET button located under the monitor and at the same time press the START button then select CAR SERVICE on the monitor; now the message "No service Due" appears on the monitor. Reset performed.


Posted on 25 May 2024 by ScegliAuto



How to reset the Mahindra Xuv 300 service light
Mahindra Xuv300 (2019-2024 / MK 1) If you want to postpone the service of your Mahindra Xuv 300 or if you have just done it and you want to get rid of the warning light then all you ha
How to replace the Mahindra XUV 300 key battery
Mahindra Xuv300 (2019-2024 / MK 1) If the coin cell battery inside the smart key of your Mahindra XUV 300 no longer shows signs of life then it is time to replace it. Put the following
How to reset the service light on the Mahindra XUV300.
Mahindra Xuv300 (2019-2024 / MK 1) If you want to learn how to manually reset the service light on your Mahindra Xuv300, all you have to do is follow these steps. First, enter the cabi

Other guides that may interest you

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos