Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Mahindra
  4. :
  5. Xuv300
  6. : How to replace the Mahindra XUV 300 key battery

Mahindra Xuv300 - Video tutorial

Model: Mahindra Xuv300 MK 1 - Years 2019-2024
Part: Key
Operation: How to replace the Mahindra XUV 300 key battery

If the coin cell battery inside the smart key of your Mahindra XUV 300 no longer shows signs of life then it is time to replace it. Put the following steps into practice and you will be able to complete everything in seconds. Press the button on the front of the cover and release the physical emergency key. Then get yourself a flathead screwdriver (or any similar object) and open the cover. Locate the battery and remove it. Install the new battery and finally replace the cover correctly. All that remains is to test its operation.


Posted on 8 May 2024 by ScegliAuto



How to reset the Mahindra Xuv 300 service light
Mahindra Xuv300 (2019-2024 / MK 1) If you want to postpone the service of your Mahindra Xuv 300 or if you have just done it and you want to get rid of the warning light then all you ha
How to perform a service reset on Mahindra XUV 300
Mahindra Xuv300 (2019-2024 / MK 1) In this video tutorial we can see how to reset the service warning light on Mahindra XUV 300. The first thing to do will be to perform vehicle mainte
How to replace Mahindra XUV key controls
Mahindra Xuv300 (2019-2024 / MK 1) If we want to proceed with repairing the remote control key of our car in the event that the closing and opening controls are damaged, we will find t

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos