Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mahindra
    3. :
  3. Marazzo
    4. : How to reset the service indicator on the Mahindra Marazzo.

Mahindra Marazzo - Video tutorial

Model: Mahindra Marazzo MK 1 - Years 2018-2024
Part: Instrument cluster
Operation: How to reset the service indicator on the Mahindra Marazzo.

Thanks to the following guide, you will be able to independently complete the reset of the service light that continues to light up on the dashboard of your Mahindra Marazzo. First, you need to go inside the car and reach the driver's seat. At this point, make sure the car's dashboard is turned off, then hold down the "Set" button located below the tachometer and simultaneously turn on the dashboard. Wait a few seconds and as soon as the service light goes off, release the "Set" button and the reset procedure is successfully completed.


Posted on 5 May 2023 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos