Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Alternator Belt and Tensioner on the Mahindra Thar

Model: Mahindra Thar MK 2 - Years 2020-2026
Part: V-belt

In this guide, you will find the main instructions to remove and replace the serpentine belt and its tensioner on the Mahindra Thar. First, open the hood and start by removing the reservoir located at the top. Next, remove the serpentine belt cover by loosening the tensioner to take off the alternator belt, as shown in the video. At this point, unscrew the mounting screws of the belt tensioner, replacing it with the original part, and follow the video tutorial to the end for reassembly!

Updated on 8 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Air Filter in a Mahindra Thar
How to Replace the Air Filter in a Mahindra Thar
Mahindra Thar (2020-2026 / MK 2) If you want to replace the air filter located in the engine compartment of your Mahindra Thar Mk2, read this mini guide carefully and follow the inst…
Replace the Engine Oil and Oil Filter on the Mahindra Thar
Replace the Engine Oil and Oil Filter on the Mahindra Thar
Mahindra Thar (2020-2026 / MK 2) Here are the instructions needed to replace the engine oil and oil filter while performing the regular maintenance service on the Mahindra Thar. Firs…
How to Replace the Cabin Air Filter in the Mahindra Thar?
Mahindra Thar (2020-2026 / MK 2) Replacing the cabin air filter in the Mahindra Thar, as shown in this tutorial, is an extremely simple and quick operation. First, position yourself …

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos