Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Mahindra
  4. :
  5. Thar
  6. : How do you replace the coolant on your Mahindra Thar?

Mahindra Thar - Video tutorial

Model: Mahindra Thar MK 2 - Years 2020-2024
Part: Antifreeze liquid
Operation: How do you replace the coolant on your Mahindra Thar?

In order to replace the coolant of the Mahindra Thar you have to go and open the hood, in order to have access to the components inside the engine compartment. In the part to the right of the engine block, at the bottom, there will be the drain plug which must be unscrewed to collect the old liquid. Once this has completely escaped, it will be necessary to close the drain plug and top up from the special hole located next to the air filter. When the liquid has been poured in, it will be possible to close the hole with the appropriate cap, checking that everything works correctly.


Posted on 4 April 2023 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos