Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Mahindra
  4. :
  5. Thar
  6. : How do you replace the Mahindra Thar clutch?

Mahindra Thar - Video tutorial

Model: Mahindra Thar MK 2 - Years 2020-2024
Part: Clutch
Operation: How do you replace the Mahindra Thar clutch?

In order to replace the Mahindra Thar clutch, you have to go and lift the car, so that you can have access to the components in the lower part of the engine compartment: here it will be possible to locate the gearbox, connected to the clutch itself. You will have to unscrew all the bolts that secure the box to its housing and you will also have to disconnect the relative connectors, so that it is completely removed. After removal it will be possible to access the clutch, which will be removed from its housing by unscrewing the fixing screws; in this way it will be possible to insert the new one, assembling all the components previously removed.


Posted on 18 July 2022 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos