Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mahindra
    3. :
  3. Thar
    4. : Change the Mahindra Thar engine oil and oil filter

Mahindra Thar - Video tutorial

Model: Mahindra Thar MK 2 - Years 2020-2024
Part: Engine oil
Operation: Change the Mahindra Thar engine oil and oil filter

Below we will see the instructions necessary to replace the engine oil and the oil filter, performing the regular maintenance service, of the Mahindra Thar. First of all we lift the car and start unscrewing the oil vent bolt located under the engine, letting it drain in a container for about ten minutes; after which we unscrew the oil filter cartridge, replacing it with the new one, screwing it in by hand and gently tightening, as shown in the video. Finally, unscrew the filler cap and pour in the new engine oil, of the right type!


Posted on 17 May 2024 by ScegliAuto



How to change the engine oil on the Mahindra Thar
Mahindra Thar (2020-2024 / MK 2) If we intend to replace the engine oil and oil filter on this car by ourselves, in the description that is given below we will find the step-by-step
How to replace the Mahindra Thar air filter
Mahindra Thar (2020-2024 / MK 2) If you want to replace the air filter inside the engine compartment of your Mahindra Thar Mk2 then you just have to read the following mini guide car
How to replace the cabin filter of the Mahindra Thar 2021.
Mahindra Thar (2020-2024 / MK 2) If you need to replace the cabin air filter on your Mahindra Thar Mk2 (year 2021) by yourself but don't know how to do it, then you just need to read

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos