Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mahindra
    3. :
  3. Thar
    4. : How to change the engine oil on the Mahindra Thar

Mahindra Thar - Video tutorial

Model: Mahindra Thar MK 2 - Years 2020-2024
Part: Engine oil
Operation: How to change the engine oil on the Mahindra Thar

If we intend to replace the engine oil and oil filter on this car by ourselves, in the description that is given below we will find the step-by-step instructions to carry out the replacement and we can also refer to the images in the video. Open the bonnet and unscrew the oil filler cap, then lift the car and get a container to collect the used oil when we go to unscrew the drainage cap. Then locate the oil filter that we are going to unscrew with the appropriate wrench to replace it with the new one after changing the seal. After all the oil has come out, screw the drain plug back on and then go back to the top of the engine compartment to fill the circuit with the new lubricant.


Posted on 6 July 2022 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos