Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
To replace the exhaust on the Malaguti Madison 250, you will need to loosen the screws that hold it to the appropriate supports, which will be located on the right side of the bike near the rear wheel: once these screws have been unscrewed, it will be possible to proceed by widening the ring that connects the exhaust to the respective exhaust manifold, so that it can be completely removed. Once the old exhaust has been removed, you can insert the new one so that it is secured with the appropriate supports and connected to the exhaust pipe through the connecting clamp.

Posted on 7 April 2025 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the exhaust pipe of the Malaguti Madison 250E?
How do you replace the exhaust pipe of the Malaguti Madison 250E?
Madison 250 It will be possible to replace the exhaust pipe of the Malaguti Madison 250E by loosening the screws that fix the exhaust terminal to its housing, on…
How do you replace the exhaust pipe of the Malaguti Madison RS250?
How do you replace the exhaust pipe of the Malaguti Madison RS250?
Madison 250 In order to replace the exhaust on the Malaguti Madison RS250, you need to loosen the screws that secure the exhaust terminal supports, located on th…
How do you replace the variator of the Malaguti Madison RS250?
How do you replace the variator of the Malaguti Madison RS250?
Madison 250 To replace the variator of the Malaguti Madison RS250, you need to loosen the screws that secure the transmission cover, located near the rear wheel …

How to Check the Coolant Level in a Yamaha Xmax

In the following video, you will learn how to check the coolant level in a 2008 Yamaha Xmax. First, position the motorcycle on a stable surface by raising the stand. Next, lift the cover located at the top of the motorcycle to access the coolant drain bolt. To top up the coolant, unscrew the cap as shown in the video and add the fluid until it reaches the maximum level, indicated as Max. Once finished, close the valve and refit the cover. At this point, start the engine and let it run at idle for a few minutes to eliminate any air bubbles that may have formed inside.

Watch the video!


by ScegliAuto

More videos