Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Malaguti Madison 250
Part:

To replace the variator of the Malaguti Madison RS250, you need to loosen the screws that secure the transmission cover, located near the rear wheel on the left side of the motorcycle. Once the cover has been removed, you can proceed to loosen the screws that hold the variator in its housing; you will also need to remove the corresponding drive belt to insert the new part. After the belt has been installed, you can secure the variator and check that everything is functioning properly.

Posted on 12 December 2025 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the exhaust pipe of the Malaguti Madison RS250?
How do you replace the exhaust pipe of the Malaguti Madison RS250?
Madison 250 In order to replace the exhaust on the Malaguti Madison RS250, you need to loosen the screws that secure the exhaust terminal supports, located on th…
How do you replace the exhaust pipe of the Malaguti Madison 250E?
How do you replace the exhaust pipe of the Malaguti Madison 250E?
Madison 250 It will be possible to replace the exhaust pipe of the Malaguti Madison 250E by loosening the screws that fix the exhaust terminal to its housing, on…
How do you replace the exhaust pipe of the Malaguti Madison S200?
How do you replace the exhaust pipe of the Malaguti Madison S200?
Madison 250 To replace the exhaust on the Malaguti Madison 250, you will need to loosen the screws that hold it to the appropriate supports, which will be locate…

Changing the Oil and Filter on the Kawasaki Versys

Here’s how to change the oil and filter on the Kawasaki Versys. Warm up the engine for a few minutes, place the motorcycle on the centre stand, open the filler cap, and remove the drain plug underneath the engine. Place a catch basin under the oil sump, unscrew the drain plug, and let the oil drain out. Unscrew the oil filter and let all the old oil drain out. Install a new filter and tighten it with the appropriate tool. Pour half a glass of new oil into the filler cap and wait for it to flow out of the drain hole, after which replace the plug. Fill with approximately 1.8 litres of new oil, take it for a short ride to circulate the oil in the engine, stop the engine, and check the level through the designated window. Top up if necessary.

Watch the video!


by ScegliAuto

More videos