|
Do it yourself
| |||
| ||||
|
Model: Malaguti Dune 125
To replace the exhaust on a Malaguti Dune 125, loosen the screws that secure it to the corresponding supports: these are located on the side of the bike, near the rear mudguard. Once these screws are loosened, proceed to widen the ring that connects the exhaust to the exhaust manifold. Once the old exhaust is freed, insert the new one into its place: secure it to the supports with the appropriate screws and connect it to the exhaust manifold.
Updated on 23 September 2026 by ScegliAuto
Video tutorial
Related tutorials
Dune 125
The exhaust that is installed on the Malaguti Dune 125 can be replaced by loosening the screws that secure it to the corresponding supports: these wi…
Dune 125
To replace the exhaust on a Malaguti Dune 125, loosen the bolt securing it at the top, on the left side of the bike. Once the exhaust is freed from t…
Dune 125
In this video, you will find the main instructions for performing an engine oil change during the regular maintenance service on a Malaguti Dune 125,…
|
How to Replace the Front Headlight on the BMW F800GS
In this tutorial, you will see how to replace the front headlight on the BMW F800GS, an extremely simple and quick operation. First, ensure the key is not inserted for safety, then locate the power connector at the back of the headlamp and disconnect it by pressing the clip. Next, unscrew the two side bolts using a Torx T40 key, grasp the headlight and pull it away from the support. At this point, you can insert the replacement, tighten the two bolts, and reconnect the power connector. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.008
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |