Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Maruti
    3. :
  3. Maruti Alto
    4. : Car stereo

Maruti Alto - Car stereo

Maruti Alto (2012-2019 / AOD)
How to remove the car stereo of Maruti Alto 800.
Today we will see, in this short and simple guide, how to disassemble and replace the factory car radio of the Maruti Alto 800. First, we get into the car and …read all…
Posted on 29 June 2023 by ScegliAuto
Car stereo (1) Bodywork (1) Control unit (1) Wheel rim (1) Key (2) Timing belt (1) Dashboard (1) Headlight (1) Tail light (1) Fog lights (1) Air filter (1) Cabin air filter (1) Petrol filter (1) Side turn signal light bulb (1) Headlight bulb (1) Rear light bulb (1) Engine oil (2) Outside rearview mirror (1) Windscreen wipers (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos