Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Maruti
    3. :
  3. Maruti Baleno
    4. : Door panel

Maruti Baleno - Door panel

Maruti Baleno (2015-2023 / MK 2)
How do you remove the door panel in the Maruti Baleno?
Removing the door panel in the Suzuki Baleno requires that you first remove a few screws, some of which are protected by a protective panel. The video shows us …read all…
Posted on 6 July 2022 by ScegliAuto
Maruti Baleno (2015-2023 / MK 2)
Removal of the Maruti Baleno front door panel
In today's video tutorial we will see how to remove and replace the front door panel of the Maruti Baleno, in simple and quick steps. First we open the front …read all…
Posted on 20 June 2022 by ScegliAuto
Car stereo (1) Battery (1) Wheel rim (1) Key (1) Air filter (2) Petrol filter (1) Rear light bulb (1) Door panel (2) Wheel (1) Outside rearview mirror (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos