Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Suzuki
    3. :
  3. Maruti Swift
    4. : Checks and maintenance

Suzuki Maruti Swift - Checks and maintenance

Suzuki Maruti Swift (2005-2021 / Rs413d, Rs415, Rs413)
How do you reset the Service light of the Maruti Swift?
The Service light reset on the Maruti Swift is done by pressing the appropriate button to turn on the instrument panel and then holding down the button below …read all…
Posted on 6 May 2024 by ScegliAuto
Suzuki Maruti Swift (2005-2021 / Rs413d, Rs415, Rs413)
How do you set the clock on the Maruti Swift?
To set the clock on the Maruti Swift, you need to turn on the instrument panel so that you can use the controls located on it. You will need to hold down the …read all…
Posted on 24 April 2023 by ScegliAuto
Suzuki Maruti Swift (2005-2021 / Rs413d, Rs415, Rs413)
How to adjust the time in the Maruti Swift?
In this tutorial we can see how to adjust the time in the Maruti Swift, a very simple and fast operation, to be carried out after being left with the battery …read all…
Posted on 16 June 2022 by ScegliAuto
Suzuki Maruti Swift (2005-2021 / Rs413d, Rs415, Rs413)
How to clean the engine of the Maruti Swift
To carry out a thorough cleaning of the engine compartment on the Maruti Swift it is first necessary to remove the plastic cover placed to protect the engine …read all…
Posted on 22 May 2022 by ScegliAuto
Shock absorbers (1) Bodywork (1) Key (2) Timing belt (1) -board computer (1) Checks and maintenance (4) Tail light (1) Fog lights (1) Air filter (1) Cabin air filter (2) Light bulb (1) Engine oil (1) Front bumper (1) Instrument cluster (2) Drums and shoes (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos