Do it yourself
Frequently asked questions about cars and motorcycles

How to Reset the Trip Odometer on a Maruti Celerio?

Model: Suzuki Maruti Celerio MK 1 - Years 2014-2023
Part: Warning light – error code

To reset the trip odometer on the Maruti Celerio, turn on the instrument cluster by rotating the key in the ignition switch. Once the cluster is powered, press the button on its right until the display shows the kilometres since the last reset. To reset the kilometres, press and hold the button to the right of the cluster until the display returns to zero. To verify the reset, turn off and then turn on the cluster again.

Updated on 13 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Suzuki Maruti Celerio (2014-2023 / MK 1) In this tutorial, see how to remove the air filter on a Maruti Celerio. This operation is very simple and quick, to be done when you need to clean or…
Suzuki Maruti Celerio (2014-2023 / MK 1) The spare wheel on the Maruti Celerio is located inside the boot of the vehicle. To access the spare wheel, open the tailgate and lift the carpet at …
Suzuki Maruti Celerio (2014-2023 / MK 1) The replacement of the clutch in the Maruti Celerio can be carried out by lifting the car to loosen all the bolts securing the gearbox, which will be…

Other guides you may be interested in

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos