Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Repair the Third Brake Light on a Maruti Celerio (Without Replacing It)

Model: Suzuki Maruti Celerio MK 1 - Years 2014-2023
Part:

Repair the third brake light on a Maruti Celerio without replacing it. The YouTuber removed the light from its housing by taking out the three screws that held it in place, leaving the connector in position. They checked with a multimeter that all the bulbs were functioning correctly. They carefully cleaned all the contacts on the bar, removed all the bulb holders, and cleaned them with very fine sandpaper, one by one, before putting them back in place. They also reinstalled the bulbs they had already checked and reattached the light, which now works perfectly.

Updated on 27 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Brake Pads on a Maruti Celerio
How to Replace the Front Brake Pads on a Maruti Celerio
Suzuki Maruti Celerio (2014-2023 / MK 1) In this tutorial video, you will learn how to remove and replace the front brake pads on a Maruti Celerio, following these simple steps. First, lift …
How to Replace the Wheel with the Spare on a Maruti Celerio
How to Replace the Wheel with the Spare on a Maruti Celerio
Suzuki Maruti Celerio (2014-2023 / MK 1) In this brief and simple guide, you will learn how to remove and replace the wheel with the spare on a Maruti Celerio, following the instructions bel…
How to Remove the Air Filter on a Maruti Celerio?
How to Remove the Air Filter on a Maruti Celerio?
Suzuki Maruti Celerio (2014-2023 / MK 1) In this tutorial, see how to remove the air filter on a Maruti Celerio. This operation is very simple and quick, to be done when you need to clean or…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos