Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where is the Spare Wheel on the Maruti Celerio?

Model: Suzuki Maruti Celerio MK 1 - Years 2014-2023
Part: Wheel

The spare wheel on the Maruti Celerio is located inside the boot of the vehicle. To access the spare wheel, open the tailgate and lift the carpet at the base of the boot. Underneath, you will find the spare wheel, which can then be extracted from its housing and used to replace one of the already installed wheels. To perform this operation, you will also need to use the jack and the wheel brace located in the same housing as the spare wheel.

Updated on 6 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Wheel with the Spare on a Maruti Celerio
How to Replace the Wheel with the Spare on a Maruti Celerio
Suzuki Maruti Celerio (2014-2023 / MK 1) In this brief and simple guide, you will learn how to remove and replace the wheel with the spare on a Maruti Celerio, following the instructions bel…
How to replace the front bumper on the Maruti Celerio?
How to replace the front bumper on the Maruti Celerio?
Suzuki Maruti Celerio (2014-2023 / MK 1) To replace the front bumper on the Maruti Celerio, open the bonnet to access the screws and rivets that secure the bumper at the front. Once these fa…
How to Manually Change the Time on a Maruti Celerio
How to Manually Change the Time on a Maruti Celerio
Suzuki Maruti Celerio (2014-2023 / MK 1) If the dashboard of your Maruti Celerio (2014-2021) displays an incorrect time, don’t worry; you can modify it in just a few seconds with the followi…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos