Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Suzuki
  4. :
  5. Maruti Celerio
  6. : How do you replace the front bumper of the Maruti Celerio?

Suzuki Maruti Celerio - Video tutorial

Model: Suzuki Maruti Celerio MK 1 - Years 2014-2023
Part: Front bumper
Operation: How do you replace the front bumper of the Maruti Celerio?

In order to replace the front bumper of the Maruti Celerio you have to open the hood, so that you have access to the screws and rivets that secure the bumper from its front. When these fasteners have been removed, it will be possible to access the inside of the front wheel arches, where you will find other rivets that will need to be removed, to allow the bumper to be completely removed. After removal it will be possible to insert the new bumper in the front part of the car, connecting it with the relative rivets and the appropriate screws.


Posted on 8 May 2024 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos