Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Maruti
  4. :
  5. Dzire
  6. : Disassembly of the front bumper of the Maruti Dzire

Maruti Dzire - Video tutorial

Model: Maruti Dzire MK 2 - Years 2012-2017
Part: Front bumper
Operation: Disassembly of the front bumper of the Maruti Dzire

Today we will see, in this video tutorial, the main instructions that will allow us to remove and replace the front bumper of the Maruti Dzire. First we open the bonnet of our car and start unscrewing all the fixing screws that we find on the upper and lower part of the bumper; after which we unscrew the additional screws that we find on both sides of the wheel arches, as shown in the video. Now let's go and gently unclip the bumper on the sides, until it is completely removed; let's replace it with the new one and reassemble everything, applying the reverse procedure!


Posted on 23 June 2022 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos