Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Maruti
  4. :
  5. Dzire
  6. : How to make special wheel covers for Maruti / Suzuki Dzire

Maruti Dzire - Video tutorial

Model: Maruti Dzire MK 2 - Years 2012-2017
Part: Wheel
Operation: How to make special wheel covers for Maruti / Suzuki Dzire

In this very simple and highly effective job, the only really difficult thing is being able to shape the brand logo on the wheel covers. After removing them from their housing, wash them and degrease them well, then with adhesive tape and a little patience, you have to cover only and exactly the car logo, shown on the original wheel covers of the car. This is very important for the success of the operation. Get a good can of black (glossy or matte, as you prefer) and a fairly large place, covered with newspaper, where to do the coloring. Pass two hands and let it dry well. Perfect result.


Posted on 23 July 2022 by ScegliAuto

This video is currently unavailable

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos