Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Access the Tire Pressure Monitor on the Suzuki Dzire

Model: Maruti Dzire MK 4 - Years 2024-2026
Part:

In this brief guide, you will find instructions to access the tire pressure monitor on the Suzuki Dzire. First, get inside the vehicle and turn on the instrument cluster; from the central display, navigate to the vehicle settings and then to the tire pressure option to access the monitor, as shown in the video. At this point, check that the pressures are correct on all four tires, restoring them to the recommended levels if necessary; the vehicle will recalibrate the TPMS sensors.

Posted on 21 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Tire Light on a 2024 Maruti Dzire
How to Reset the Tire Light on a 2024 Maruti Dzire
Maruti Dzire (2024-2026 / MK 4) If the tire warning light continues to appear on the instrument cluster of your 2024 Maruti Dzire, it means that the control module has detected a lo…
Where to Find the Fuses of the Suzuki Dzire 2
Where to Find the Fuses of the Suzuki Dzire 2
Maruti Dzire (2012-2017 / MK 2) If you are curious about where the fuse box is located inside your Suzuki Dzire second generation (year 2012-2017), just follow these simple instruct…
How to Replace the Wheel on a Maruti Dzire
How to Replace the Wheel on a Maruti Dzire
Maruti Dzire (2012-2017 / MK 2) To change the tire on the Maruti Dzire, start by opening the trunk, taking the tools and the spare tire from the lower compartment of the trunk; posi…

Other guides you may be interested in

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos