Do it yourself
Frequently asked questions about cars and motorcycles

How to Remove the Spare Tire from a Maruti Eeco

Model: Maruti Eeco MK 1 - Years 2010-2024
Part: Wheel

In this video tutorial, you will see how to disassemble and remove the spare tire from its compartment in a Maruti Eeco, following the instructions provided below. First, open the rear door and take the socket wrench provided, as well as the one to unscrew the wheel bolts; then, unscrew the bolt found above the bumper in the center, as shown in the video. At this point, replace the tire with the spare tire by lifting the vehicle with the jack; finally, reposition the tire, securing it to the floor!

Updated on 30 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Maruti Eeco (2010-2024 / MK 1) In this tutorial, see how to replace the cabin filter in the Maruti Eeco van. First, sit in the passenger seat, then open the glove compartment, gras…
Maruti Eeco (2010-2024 / MK 1) To replace the serpentine belt on a Maruti Eeco, lift the vehicle and loosen the bolts that secure the right front wheel, completely removing it. Onc…
Maruti Eeco (2010-2024 / MK 1) In this tutorial, see how to remove the air filter in the Maruti Eeco to clean or replace it directly. Before proceeding, ensure the engine is comple…

How to reset the tyre pressure warning light on the Suzuki Jimny?

To reset the tyre pressure warning light on the Suzuki Jimny, first inflate the tyres to the pressure value indicated on the corresponding sticker: this is located at the bottom of the driver's door pillar. Once the tyres are inflated, insert the ignition key and turn on the instrument panel: select the screen that indicates the tyre pressures, checking that the values change. After a few seconds, the tyre pressure warning light will automatically turn off.

Watch the video!


by ScegliAuto

More videos