Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Wheel on a Maruti Eeco

Model: Maruti Eeco MK 1 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021
Part: Wheel

Video tutorial

To replace the wheel on a Maruti Eeco, start by getting the spare wheel and the wrench to loosen the wheel nuts. Get the jack with the handle to lift it under the hood; loosen the wheel nuts; raise the vehicle; remove the nuts and take off the wheel.

Now take the spare wheel; hand-tighten the nuts; lower the vehicle and tighten the nuts with the wrench. Now you can reposition the jack with the handle under the hood; put the wrench back in its place and store the wheel in the trunk.


Updated on 23 May 2026 by ScegliAuto


Related tutorials

How to Remove the Spare Tire from a Maruti Eeco
How to Remove the Spare Tire from a Maruti Eeco
Maruti Eeco (2010-2024 / MK 1) In this video tutorial, you will see how to disassemble and remove the spare tire from its compartment in a Maruti Eeco, following the instructions p…
How to Replace the Serpentine Belt on a Maruti Eeco?
How to Replace the Serpentine Belt on a Maruti Eeco?
Maruti Eeco (2010-2024 / MK 1) To replace the serpentine belt on a Maruti Eeco, lift the vehicle and loosen the bolts that secure the right front wheel, completely removing it. Onc…
How to Replace the Suspension on a Maruti Eeco
How to Replace the Suspension on a Maruti Eeco
Maruti Eeco (2010-2024 / MK 1) To replace the suspension on a Maruti Eeco, lift the vehicle with a jack or lift so that the wheels are not in contact with the ground. This will all…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos