Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Sliding Door Handle on a Maruti Eeco?

Model: Maruti Eeco MK 1 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021
Part: Handle

Video tutorial

To replace the sliding door handle on a Maruti Eeco, unscrew the screws that secure the inner panel of the door so that it can be removed, giving access to the components at its lower part. Under the panel, there will be a fabric cover that also needs to be removed to access the screws that secure the handle mechanism from the outside.

By unscrewing the screws and disconnecting the connectors, you can detach the handle from the outer part of the door, allowing it to be replaced with a new replacement part.


Updated on 24 May 2026 by ScegliAuto


Related tutorials

How to Replace the Wheel on a Maruti Eeco
How to Replace the Wheel on a Maruti Eeco
Maruti Eeco (2010-2024 / MK 1) To replace the wheel on a Maruti Eeco, start by getting the spare wheel and the wrench to loosen the wheel nuts. Get the jack with the handle to lift…
How to Remove the Spare Tire from a Maruti Eeco
How to Remove the Spare Tire from a Maruti Eeco
Maruti Eeco (2010-2024 / MK 1) In this video tutorial, you will see how to disassemble and remove the spare tire from its compartment in a Maruti Eeco, following the instructions p…
How to Replace the Cabin Filter in the Maruti Eeco Van?
How to Replace the Cabin Filter in the Maruti Eeco Van?
Maruti Eeco (2010-2024 / MK 1) In this tutorial, see how to replace the cabin filter in the Maruti Eeco van. First, sit in the passenger seat, then open the glove compartment, gras…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos