Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Cabin Filter in the Maruti Eeco Van?

Model: Maruti Eeco MK 1 - Years 2010-2024
Part: Cabin air filter

In this tutorial, see how to replace the cabin filter in the Maruti Eeco van. First, sit in the passenger seat, then open the glove compartment, grasp it from the front side, and pull it towards you to disengage it from the dashboard. Once done, locate the rectangular housing of the filter, and if this is the first time it is being replaced, cut along the perimeter of the panel. Finally, remove the old filter, insert the replacement, and if available, install the specific cover that must be purchased separately.

Updated on 29 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Air Filter in the Maruti EECO Van?
How to Remove the Air Filter in the Maruti EECO Van?
Maruti Eeco (2010-2024 / MK 1) In this tutorial, see how to remove the air filter in the Maruti EECO van to clean or completely replace it. First, ensure the engine is cool for saf…
How to Remove the Air Filter in the Maruti Eeco?
Maruti Eeco (2010-2024 / MK 1) In this tutorial, see how to remove the air filter in the Maruti Eeco to clean or replace it directly. Before proceeding, ensure the engine is comple…
How to Replace the Fuel Filter in a Maruti Eeco?
How to Replace the Fuel Filter in a Maruti Eeco?
Maruti Eeco (2010-2024 / MK 1) As shown in this tutorial, replacing the fuel filter in a Maruti Eeco is a very simple and quick operation. First, wait for the engine to be complete…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos