Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Air Filter in the Maruti Eeco?

Model: Maruti Eeco MK 1 - Years 2010-2024
Part: Air filter

In this tutorial, see how to remove the air filter in the Maruti Eeco to clean or replace it directly. Before proceeding, ensure the engine is completely cool for safety. Start by going inside the cabin, then recline the passenger seat and lift it by grabbing it from the front side. Next, unlock the clips around the airbox perimeter, open it, and remove the old filter. Before reinserting or installing the replacement, clean the inside of the housing from any debris and dirt.

Updated on 27 July 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

How to Remove the Air Filter in the Maruti EECO Van?
How to Remove the Air Filter in the Maruti EECO Van?
Maruti Eeco (2010-2024 / MK 1) .. In this tutorial, see how to remove the air filter in the Maruti EECO van to clean or completely replace it. First, ensure.. …
How to Replace the Fuel Filter in a Maruti Eeco?
How to Replace the Fuel Filter in a Maruti Eeco?
Maruti Eeco (2010-2024 / MK 1) As shown in this tutorial, replacing the fuel filter in a Maruti Eeco is a very simple and quick operation. First, wait for the engine to be complete…
How to Replace the Serpentine Belt on a Maruti Eeco?
How to Replace the Serpentine Belt on a Maruti Eeco?
Maruti Eeco (2010-2024 / MK 1) To replace the serpentine belt on a Maruti Eeco, lift the vehicle and loosen the bolts that secure the right front wheel, completely removing it. Onc…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos