Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Fuel Filter in a Maruti Eeco?

Model: Maruti Eeco MK 1 - Years 2010-2024
Part: Fuel filter

As shown in this tutorial, replacing the fuel filter in a Maruti Eeco is a very simple and quick operation. First, wait for the engine to be completely cold for safety. Then, lift the driver's side seat and locate the filter directly in front of the air filter. Next, disconnect the upper hose using pliers, unscrew the two bolts of the mounting bracket, and remove the filter from the housing. Once the lower hose is disconnected, you can install the new filter by following the reverse procedure.

Updated on 4 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Fuel Filter on the Maruti Suzuki Eeco
How to Replace the Fuel Filter on the Maruti Suzuki Eeco
Maruti Eeco (2010-2024 / MK 1) This guide shows how to replace the fuel filter on the Maruti Suzuki Eeco Mk1. First, lift the front right seat cushion using the designated lever to…
How to Replace the Cabin Filter in the Maruti Eeco Van?
How to Replace the Cabin Filter in the Maruti Eeco Van?
Maruti Eeco (2010-2024 / MK 1) In this tutorial, see how to replace the cabin filter in the Maruti Eeco van. First, sit in the passenger seat, then open the glove compartment, gras…
How to Remove the Air Filter in the Maruti Eeco?
Maruti Eeco (2010-2024 / MK 1) In this tutorial, see how to remove the air filter in the Maruti Eeco to clean or replace it directly. Before proceeding, ensure the engine is comple…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos