Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Fuel Filter on the Maruti Suzuki Eeco

Model: Maruti Eeco MK 1 - Years 2010-2024
Part: Fuel filter

This guide shows how to replace the fuel filter on the Maruti Suzuki Eeco Mk1. First, lift the front right seat cushion using the designated lever to access the engine compartment. Using a 13 mm wrench, remove the bolts securing the filter retaining bracket. Disconnect the fuel lines by pressing the metal clips with pliers; be careful of any remaining fuel in the system. Install the new filter element and reattach the fuel lines. Tighten the bolts of the retaining bracket. At this point, you need to turn on the ignition a few times to fill the filter with fuel.

Updated on 12 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Fuel Filter in a Maruti Eeco?
How to Replace the Fuel Filter in a Maruti Eeco?
Maruti Eeco (2010-2024 / MK 1) As shown in this tutorial, replacing the fuel filter in a Maruti Eeco is a very simple and quick operation. First, wait for the engine to be complete…
How to Replace the Cabin Filter in the Maruti Eeco Van?
How to Replace the Cabin Filter in the Maruti Eeco Van?
Maruti Eeco (2010-2024 / MK 1) In this tutorial, see how to replace the cabin filter in the Maruti Eeco van. First, sit in the passenger seat, then open the glove compartment, gras…
How to Remove the Air Filter in the Maruti EECO Van?
How to Remove the Air Filter in the Maruti EECO Van?
Maruti Eeco (2010-2024 / MK 1) In this tutorial, see how to remove the air filter in the Maruti EECO van to clean or completely replace it. First, ensure the engine is cool for saf…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos