Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Dashboard of the Maruti Alto 800

Model: Maruti Alto 800 AOD - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: Dashboard

Video tutorial

Today's guide will show you the steps to remove and replace the dashboard of the Maruti Alto, following the instructions below. First, get inside the cabin and start by removing the steering wheel and its airbag by disconnecting the electrical connector and loosening the center nut; then remove the instrument cluster and disconnect the wiring located at the back, as shown in the video.

At this point, remove all the central instrumentation by taking out the radio and the climate control knobs; then unscrew the last screws to finally take off the dashboard!


Updated on 4 October 2026 by ScegliAuto


Related tutorials

How to Time the Engine of the Suzuki Alto 800 - Maruti Alto 800
How to Time the Engine of the Suzuki Alto 800 - Maruti Alto 800
Maruti Alto 800 (2012-2023 / AOD) Today's guide will show you the main steps to time the engine of the Suzuki Alto 800 and Maruti Alto 800. First, open the hood of the vehicle and rem…
How to Remove the Cabin Air Filter in a Maruti Alto 800?
How to Remove the Cabin Air Filter in a Maruti Alto 800?
Maruti Alto 800 (2012-2023 / AOD) In this tutorial, see how to remove, replace, or simply clean the cabin air filter in a Maruti Alto 800. First, sit in the passenger seat, then open …
How to Replace the Control Arm on a Maruti Alto 800
How to Replace the Control Arm on a Maruti Alto 800
Maruti Alto 800 (2012-2023 / AOD) In this short and simple guide, you will find the main instructions for removing and replacing the control arm on a Maruti Alto 800. First, lift the …

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos