Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Dashboard of a Maruti Ritz

Model: Maruti Ritz MK 1 - Years 2009-2015
Part: Dashboard

In this guide, you will see the steps to remove the dashboard of the central instrument panel of the Maruti Ritz, following the instructions below. First, get inside the vehicle and start removing the cover of the gear shift boot by unclipping it from the sides; then remove the additional plastic pieces of the central instrument panel by unscrewing the screws and disconnecting the electrical connectors, as shown in the video. At this point, proceed to remove the dashboard from the vehicle; then reassemble everything by applying the reverse procedure of disassembly!

Updated on 19 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Cabin Air Filter in a Maruti Ritz?
How to Replace the Cabin Air Filter in a Maruti Ritz?
Maruti Ritz (2009-2015 / MK 1) As shown in this tutorial, replacing the cabin air filter in a Maruti Ritz is a very simple and quick task. First, sit in the passenger seat, then op…
How to Replace Wiper Blades on a Maruti Ritz
How to Replace Wiper Blades on a Maruti Ritz
Maruti Ritz (2009-2015 / MK 1) To replace the wiper blades on your Maruti Ritz, our YouTuber purchased the parts from a Chinese e-commerce site for 379 rupees (just over $4) and sh…
How to Replace the Radio in a Maruti Ritz
How to Replace the Radio in a Maruti Ritz
Maruti Ritz (2009-2015 / MK 1) Today, you will learn how to remove and replace the radio in a Maruti Ritz by following the instructions below. First, get inside the vehicle and sta…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos