Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Control Arm on a Maruti Alto 800

Model: Maruti Alto 800 AOD - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: Control arm

Video tutorial

In this short and simple guide, you will find the main instructions for removing and replacing the control arm on a Maruti Alto 800. First, lift the vehicle with a jack on the front side, and start removing the wheel; then use a socket wrench to unscrew the bolt of the control arm ball joint to remove it, as shown in the video.

At this point, install the new control arm, which should have the same dimensions; also replace (if necessary) the other control arm, following the video until the end!


Updated on 24 May 2026 by ScegliAuto


Related tutorials

How to Time the Engine of the Suzuki Alto 800 - Maruti Alto 800
How to Time the Engine of the Suzuki Alto 800 - Maruti Alto 800
Maruti Alto 800 (2012-2023 / AOD) Today's guide will show you the main steps to time the engine of the Suzuki Alto 800 and Maruti Alto 800. First, open the hood of the vehicle and rem…
How to Replace the Fuel Filter in a Maruti Alto 800?
How to Replace the Fuel Filter in a Maruti Alto 800?
Maruti Alto 800 (2012-2023 / AOD) Replacing the fuel filter in a Maruti Alto 800 is a very simple and quick operation. First, lift the left rear area of the car with a jack, then loca…
How to Replace the Air Filter in a Maruti Alto 800?
How to Replace the Air Filter in a Maruti Alto 800?
Maruti Alto 800 (2012-2023 / AOD) In this tutorial, you will see how to replace the air filter in a Maruti Alto 800, a very simple and economical task. Before proceeding, wait for the…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos