Do it yourself
Frequently asked questions about cars and motorcycles

How to Change the Wishbone on the Opel Corsa D

Model: Vauxhall Corsa Corsa D - Years 2006-2014
Part: Control arm

Here’s how to change the front suspension wishbone on an Opel Corsa D: lift the front of the car and secure it on axle stands. Remove the wheel from the side you need to work on, take off the wheel arch liner, and disconnect the hub arm, securing the pin with a 16mm spanner and unscrewing the nut with a socket. Locate the two mounting bolts for the wishbone to the chassis, and using a T18 key, unscrew the head and nut of the bolt until the old wishbone is removed. Lubricate the mounting bolts with grease to facilitate assembly and prevent seizing in the future. You can find the part on auto-doc.it with the EAN code 4059191266777 (check if it’s for the right or left side) for £12.99, plus £9.95 for shipping. Present the wishbone and screw in the two mounting bolts to the chassis, then reconnect it to the hub by inserting it into its housing on the hub and tightening the nut. Tighten the ball joint nut and the bolts that secure the wishbone to the chassis; to align the second hole more easily, you can slightly lift the brake disc with the jack. Refit the wheel arch liner, reattach the wheel, and if necessary, move to the other side.

Posted on 27 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Vauxhall Corsa (2000-2006 / Corsa C) In this video we see how to replace the clutch cable on an Opel Corsa C. The clutch cable is a mechanical component related to the clutch system, and…
Vauxhall Corsa (2000-2006 / Corsa C) The main instructions in this guide will show you how to remove and replace the electric power steering motor on an Opel Corsa. First, lift the vehic…
Vauxhall Corsa (2000-2006 / Corsa C) The following steps will show us how to disassemble and replace the clutch of the Opel Corsa 1.7 CDTi. First, lift the car and start by removing the …

Other guides you may be interested in

How to Reset the Central Locking of the Volkswagen Golf 4?

If the central locking system of the Volkswagen Golf 4 is not working, it is likely necessary to reset the system: to do this, open the driver's door and detach the side panel of the dashboard next to the steering wheel. Under this panel, you will find the fuses, including the one for the central locking, which is indicated in the manual as number 14. To reset the system, remove this fuse from its housing, then reinsert it or replace it with a new one of the same amperage: this will reset the central locking system.

Watch the video!


by ScegliAuto

More videos